Miami Logistics Guides

Top 8 Hazmat Compliance Companies in Tacoma

GF
Go Freight AI Editorial
November 7, 2026 · 9 min read · Dangerous Goods

Hazardous cargo in the South Sound moves through several gates at once: container terminals at the Port of Tacoma managed by the Northwest Seaport Alliance, air cargo flights out of Seattle-Tacoma International Airport to the north, Alaska-bound trailers and barges loading on the Tideflats, and truck traffic along I-5 past Joint Base Lewis-McChord. Each of those gates applies its own rulebook — 49 CFR on the highway, the IMDG Code on the water and the IATA Dangerous Goods Regulations in the air — so Tacoma shippers often need help with training, packaging and paperwork that holds up across more than one mode.

Go Freight publishes this list; entries 2–8 are drawn from each company’s own published information and public listings.

1. Go Freight — Miami, FL

go-freight.ai · 6901 NW 26 Ave, Miami, FL 33147 · (786) 445-0150

Go Freight is an asset-based 3PL founded in 2004 that runs hazmat trucking, bonded warehousing and dangerous-goods freight through PortMiami, Port Everglades and Miami International Airport. It operates 100+ owned trucks, its own chassis pool and a 104,000 sq ft bonded warehouse, and it is a TSA-approved bonded carrier with FMCSA authority and BBB accreditation.

To be clear, Go Freight has no office, terminal, trucks or staff in Tacoma. It belongs on this list for Pierce County shippers whose regulated cargo is headed to or coming from South Florida — Latin American and Caribbean lanes, ocean containers routed through Miami-area ports, or stock positioned closer to Florida buyers — where a compliant handoff at the Florida end matters as much as the paperwork prepared in Washington.

2. Trident Safety USA — Lakewood, WA

tridentsafetyusa.com · 10521 101st St Ct SW, Lakewood, WA 98498

Trident Safety USA is the most purely compliance-focused firm on this list. Its IATA directory profile lists it as an IATA CBTA Center–certified training organization for dangerous goods and describes “comprehensive and bespoke hazardous materials solutions from training to on-site support,” covering auditing, classification, packaging and declarations. The company describes itself as delivering “global on-site compliance, training and expertise around the transportation of dangerous goods.”

Its listed address sits in Lakewood, a short drive down I-5 from the Tacoma Tideflats and next door to JBLM, which makes it the natural first call for Pierce County shippers who want IATA or multimodal training delivered at their own facility rather than in a distant classroom.

3. Craters & Freighters Seattle / Tacoma — Kent, WA

cratersandfreightersseattle.com · 6649 S. 216th St., Kent, WA 98032 · (253) 872-6869

The Craters & Freighters network flags its Seattle/Tacoma branch as hazmat certified, and the branch advertises certified hazardous materials shipping and packaging services. Network-wide, the company says its hazmat packaging, labeling and documentation work covers dangerous goods under 49 CFR, IATA, IMDG and ICAO rules, with UN-certified packaging, 4G boxes, poly bagging and overpack crating available as a service or as supplies.

The facility is in Kent’s industrial valley between Sea-Tac and Tacoma, so it suits shippers who need a one-off item crated, marked and documented for air or ocean rather than an ongoing compliance program.

4. Carlile Transportation — Tacoma, WA

carlile.biz · 2301 Taylor Way, Tacoma, WA 98421 · (253) 874-2633

Carlile runs a shipping terminal on Taylor Way in the Port of Tacoma with LTL, FTL, drayage and steamship and barge connections to Alaska. Its hazmat page says the carrier is “qualified to move 9 hazardous classes,” that its hazmat employees are trained to handle the materials it transports, and that it registers as a hazmat carrier with FMCSA.

Carlile also publishes practical shipper guidance — a limited-quantity page that walks through 49 CFR, IATA DGR and IMDG Code differences, Hazmat BOL instructions and placarding references. Note the Tacoma terminal’s rule that hazmat paperwork for a sailing must arrive by end of day the day before departure.

5. TOTE Maritime Alaska — Tacoma, WA

totemaritime.com · 500 East Alexander Avenue, Tacoma, WA 98421 · (866) 515-3256

TOTE Maritime Alaska sails from its Port of Tacoma terminal on East Alexander Avenue and says it has the equipment and expertise to deliver hazardous cargo to and from Alaska, backed by a dedicated HAZMAT team. Shippers get a Hazardous Material Declaration Form, a Hazardous Clause (UN3166) form and a searchable acceptance listing that codes each material as approved, rejected or needing further review.

TOTE’s customer reference guide spells out what a compliant hazmat manifest must contain — UN number, proper shipping name, class, packing group, flash point for Class 3, marine pollutant and RQ notations — and lists a Tacoma-to-Anchorage hazardous line at (253) 449-2122. It is a carrier rather than a consultancy, but its acceptance rules are where many Tacoma shippers’ paperwork gets tested.

6. Quality Transport & Truck-Rail Handling — Tacoma, WA

qatp-trh.com · 457 E. 18th Street, Tacoma, WA 98421 · (253) 383-1009

Quality Transport and its sister company Truck-Rail Handling are headquartered in Fremont, California, and operate a Tacoma transload facility focused on plastics and chemicals with direct access to the ports of Tacoma and Seattle. The company lists “certified handling and transportation of hazardous materials with complete regulatory compliance” among its services.

The Tacoma site handles railcars, totes, drums, super sacks and flexi bags, with indoor storage, outdoor storage for totes and drums, lot control and sampling — a fit for bulk chemical shippers who need regulated product moved between rail, truck and ISO containers.

7. Span Alaska — Auburn, WA

spanalaska.com · 3815 W Valley Highway N, Auburn, WA 98001 · (253) 395-7726

Span Alaska consolidates Lower 48 freight for Alaska from a terminal in Auburn, about 15 miles north of downtown Tacoma. Its specialized-solutions page lists hazmat alongside air charter, expedited and temperature-controlled service, and its FAQ says warehouse staff receive training on the identification, segregation and secure stowage of hazardous materials.

Span notes that additional documents may be required for hazardous materials and that it does not accept hazardous waste, so it is best suited to regulated product freight bound for Alaska rather than waste streams.

8. AIT Worldwide Logistics — Seattle Life Sciences — SeaTac, WA

aitworldwide.com · 18900 8th Avenue S, Suite 800, SeaTac, WA 98148 · (206) 420-2752

AIT’s SeaTac office sits next to Seattle-Tacoma International Airport and offers air freight, sea freight, customs clearance, warehouse management and white-glove service. The company states it has been IATA-certified since 1978 and lists hazardous materials and dangerous goods among its certifications.

AIT is based in the Sea-Tac airport area rather than Tacoma itself; it fits Pierce County shippers whose dangerous goods leave by air, such as lithium batteries, diagnostic specimens or chemical samples. Ask the office which DG commodities it accepts before booking.

How to evaluate a hazmat compliance provider in Tacoma

  • Match the provider to your mode: an IMDG-trained ocean team at the Tideflats is not automatically qualified to sign an IATA shipper’s declaration for a Sea-Tac flight, and vice versa.
  • For training, ask whether the course meets the general-awareness, function-specific and security-awareness elements of 49 CFR 172.704 and whether it can be delivered on-site at your Tacoma or Fife facility.
  • If you ship to Alaska, get the carrier’s hazardous acceptance list and paperwork cutoffs in writing — Tacoma terminals can require hazmat documents a full day before sailing.
  • Confirm who owns classification and the SDS review: a packer or carrier can mark and label, but the shipper is still responsible for the classification it declares.
  • For UN packaging, ask for the package test report and closure instructions, and check that the specification marking matches the packing group and gross weight you actually ship.
  • Look for a real South Sound address you can visit, and check what a provider will do at JBLM-area or Tideflats sites versus what it handles only at its own dock.

Before picking a partner, review the IMDG Code compliance basics for ocean cargo leaving the Port of Tacoma, the IATA lithium battery shipping rules for anything flying out of Sea-Tac, and what belongs on a hazmat shipping paper.

Frequently asked questions

Can I get IATA or IMDG dangerous goods training on-site in the Tacoma area?

Yes. Trident Safety USA, listed in Lakewood, is an IATA CBTA Center–certified dangerous goods training organization and describes its services as running from training to on-site support, including audits, classification, packaging and declarations.

Who can pack and label a hazmat shipment near Tacoma?

The Craters & Freighters Seattle/Tacoma branch in Kent is flagged as hazmat certified and offers hazmat packaging, labeling and documentation under 49 CFR, IATA, IMDG and ICAO rules, including UN-certified packaging and overpack crating.

What do Alaska carriers in Tacoma need for hazardous cargo?

TOTE Maritime Alaska uses a Hazardous Material Declaration Form and an acceptance listing, and its manifest guide requires the UN number, proper shipping name, class and packing group. Carlile’s Tacoma terminal requires hazmat paperwork by end of day before the sailing.

Get a quote

Shipping regulated freight between Tacoma and South Florida — a container routed through PortMiami or Port Everglades, or dangerous goods connecting through Miami International Airport to Latin America and the Caribbean? Go Freight handles the Florida end. Request a quote or call (786) 445-0150.

Go Freight AI · Miami

Ready to move your next container?

Asset-based drayage at PortMiami and Port Everglades. We own the trucks, chassis, and the AI — same-day pickup, no brokers, no chassis rental surprises.

Topics: #Dangerous Goods #Hazmat Compliance #IATA #IMDG #Tacoma #Top 8 #Washington

Move freight with the only crew that owns the trucks, the warehouse, and the AI.

From the port to the door, in one phone call. We'll quote your next load in minutes — no logins, no broker games.

⏱ Rate locks for 48 hours — call today before capacity tightens.