Miami Logistics Guides

Top 10 Hazmat Compliance Companies in Texas

GF
Go Freight AI Editorial
November 4, 2026 · 10 min read · Dangerous Goods

Much of Texas’s hazardous cargo starts along the Gulf: refinery and petrochemical output on the Houston Ship Channel, liquids and LNG through the Port of Corpus Christi, chemicals out of Port Freeport, and crude and fuels at Beaumont and Port Arthur. Air shipments of lithium batteries, samples and aircraft parts fly from Houston’s George Bush Intercontinental (IAH) and Dallas/Fort Worth International (DFW), while trucks carry placarded loads along I-10, I-45, I-20 and I-35 to the Laredo crossings into Mexico. With 49 CFR, IATA and the IMDG Code all in play on a single export, Texas shippers lean on specialist packers, trainers and consultants to keep paperwork and packaging right.

Go Freight publishes this list; entries 2–10 are drawn from each company’s own published information and public listings. Every provider below was checked against its own website for the hazmat service it offers and for a Texas address.

1. Go Freight — Miami, FL

go-freight.ai · 6901 NW 26 Ave, Miami, FL 33147 · (786) 445-0150

Go Freight is an asset-based 3PL founded in 2004 that runs 100+ owned trucks, its own chassis pool and a 104,000 sq ft bonded warehouse; it is a TSA-approved bonded carrier with FMCSA authority and BBB accreditation. It handles hazmat trucking, bonded warehousing and dangerous-goods freight through PortMiami, Port Everglades and Miami International Airport (MIA). For Texas chemical, coatings and energy-equipment shippers selling into Latin America and the Caribbean, Go Freight is the South Florida partner that receives dangerous goods arriving from the Gulf Coast, stores them under bond and moves them to the Miami-area port or airport for export, and handles inbound DG freight from those lanes on the Florida side.

2. DGM (Dangerous Goods Management) — Houston, TX

dgm-usa.com · 1813 Greens Rd, Houston, TX 77032 · (281) 821-0500

DGM’s U.S. headquarters is in north Houston near IAH, and the company also lists a Dallas-area location at 1545 Crescent Dr in Carrollton. It describes itself as a packing and crating company specializing in dangerous goods across all nine hazard classes, with mobile packing teams and a DGMATIC system for repouring bulk chemicals from tankers and ISO tanks. DGM also runs dangerous goods training in the classroom, on-site, by live webinar and online, covering IATA CBTA, ICAO, IMDG, 49 CFR road rules, lithium batteries and general awareness.

3. Gulf Coast Crating — Houston, TX

gulfcoastcrating.com · 1020 Rankin Rd, Houston, TX 77073 · (713) 862-7283

Gulf Coast Crating operates crating and warehouse sites in Houston, Baytown, La Porte and Grand Prairie, close to the Houston ocean terminals and the Dallas–Fort Worth market. Its hazmat packing team of dangerous goods specialists handles certification, documentation, packaging, marking and labeling, and prepares dangerous goods declarations for export by air, ocean or road. Listed services include repours into UN-spec plastic and steel drums, UN4G cartons and UN4D plywood crates, DG inspections, vehicle preparation, container loading with blocking, bracing and placarding, on-site work and consulting.

4. Transaction Packing, Inc. — Houston, TX

transactionpacking.com · 4120 Consulate Plaza Dr, Ste 150, Houston, TX 77032 · (281) 443-0476

Transaction Packing (TPI) is an export packer with facilities near George Bush Intercontinental Airport and near the Houston Ship Channel. Its dangerous goods page states that TPI follows UN specifications for hazardous material packing under IATA/ICAO, IMO and DOT rules and can take on in-transit DG packing. The company says it provides certified agents for IATA, ICAO, IMO, DOT and radioactive materials by air, along with airport transfers, local pick-up and delivery, and on-site mobile packing crews.

5. Americase / HazMat Safety Consulting — Waxahachie, TX

americaseinternational.com · 6200 N I-35E, Waxahachie, TX 75165 · (888) 705-4202

Americase International, south of Dallas on I-35E, operates the Americase, HazMat Safety Consulting and Fulcrum Testing brands. Under HazMat Safety Consulting it offers customized hazmat training that it says is delivered by former PHMSA regulators, covering DOT general awareness, function-specific, safety and security awareness, plus lithium batteries, limited quantity and e-commerce shipments, flammable liquids, compressed gases, explosives, and engines and machinery. The company also lists dangerous goods consulting, special permit and approval assistance, safety testing and lithium battery transport and storage solutions.

6. Hazmatpac — Houston, TX

hazmatpac.com · 7905 Blankenship Dr, Houston, TX 77055 · (800) 923-9123

Hazmatpac focuses on hazardous material packaging and shipping supplies, with customer service representatives who help shippers pick the right certified container. Its catalog covers UN packaging products, accessories and custom boxes, and its regulatory section includes DOT and FAA audit preparation. For Houston-area chemical and laboratory shippers, it is a local source for specification packaging rather than a packing service.

7. ChemTranUSA — Houston, TX

chemtranusa.com

ChemTranUSA is a Houston chemical logistics specialist whose hazmat-certified staff pick up shipments at the customer’s facility, package and document them for the transport mode, and track them to delivery. It offers temperature-controlled storage and distribution for non-bulk products and chemical samples at its Houston location, and supports freight forwarders by repacking non-compliant or damaged shipments, building custom crates and repouring product into smaller containers for air. Shippers outside Houston can receive pre-labeled UN-approved packaging and documentation to pack at their own site.

8. Trinity Consultants — Dallas, TX

trinityconsultants.com · 12700 Park Central Dr, Ste 600, Dallas, TX 75251 · (972) 661-8100

Dallas-headquartered Trinity Consultants is a large environmental, health and safety consultancy whose dangerous goods service sheet says it can address domestic and international hazmat challenges. It lists in-house certified Dangerous Goods Safety Advisors (DGSA) for European requirements, monitoring of compliance with dangerous goods carriage rules, advice on carriage operations and preparation of annual dangerous goods reports. It suits Texas manufacturers that want hazmat transportation reviewed alongside their wider EHS programs.

9. C.L. Smith — Houston, TX

clsmith.com · 1918 Collingsworth St, Houston, TX · (800) 264-1202

C.L. Smith is a St. Louis-based packaging distributor that lists a Houston location on Collingsworth Street. Its hazardous material packaging line includes special permit packaging, 4GV/variation 2 packaging, tin cans, pails and drums, plastic packaging, battery and fireworks packaging, labels and placards, and spill containment, along with UN-rated drums. The company also states that it operates a UN package testing facility, though its site does not say which location houses it.

10. Craters & Freighters Dallas — Dallas, TX

cratersandfreightersdallas.com · 5535 Military Pkwy, Dallas, TX 75227 · (972) 840-8147

The Dallas Craters & Freighters location advertises certified hazardous materials shipping and packaging services and carries the network’s hazmat-approved designation. Across the network, hazmat-certified locations provide packaging, documentation and labeling under 49 CFR, IATA, IMDG and ICAO, including UN-certified packaging, 4G boxes, poly bagging and overpack crating. It is a practical option for DFW shippers with one-off or oversized dangerous goods that need crating plus paperwork.

How to evaluate a hazmat compliance provider in Texas

A provider that looks good on paper can still be the wrong fit for a Gulf Coast export or a Laredo-bound truckload. Before signing on, check the following:

  • Mode coverage: confirm the team works under 49 CFR for highway and rail, IATA for air out of IAH or DFW, and the IMDG Code for vessel moves through Houston, Freeport or Corpus Christi.
  • Hazard classes handled: ask whether they accept your specific materials, such as Class 3 flammables, Class 8 corrosives, Class 9 lithium batteries or Class 7 radioactive material.
  • Packaging capability: look for in-stock UN specification boxes, drums and crates, repour or repack services, and the ability to build combination packaging to a manufacturer’s closure instructions.
  • Documentation: the provider should prepare or review shipping papers and dangerous goods declarations and explain who signs the shipper’s certification.
  • Training records: if they train your staff, ask for course outlines mapped to 49 CFR 172.704 and written test records you can keep on file.
  • Location and reach: a site near your origin, port or airport cuts drayage, and on-site or mobile crews help plants along the Ship Channel or in West Texas oil country.

For background before you call, read our guides to the 9 hazmat classes, hazmat shipping papers and IMDG Code compliance basics.

Frequently asked questions

How often do Texas hazmat employees need DOT training?

Under 49 CFR 172.704, every hazmat employee needs general awareness, function-specific, safety and security awareness training within 90 days of starting hazmat duties and recurrent training at least once every three years. The rule applies the same way in Houston, Dallas or El Paso, and employers must keep training records. Staff who prepare air shipments under the IATA Dangerous Goods Regulations must also complete recurrent training within 24 months of their previous training.

Can a Texas exporter ship to the Port of Houston using IMDG Code documentation instead of 49 CFR?

Yes, in many cases. 49 CFR 171.22 and 171.25 let a shipment prepared under the IMDG Code move by highway or rail within the United States when it is part of a vessel movement, subject to conditions such as U.S. hazard communication and certain material-specific limits. Exporters trucking to Barbours Cut, Bayport or other Gulf Coast terminals should confirm with their packer or consultant that their shipment meets those conditions.

Do Texas shippers need to register with PHMSA?

Some do. Under 49 CFR 107.601, companies that offer or transport certain quantities and types of hazardous materials, such as shipments requiring placards or bulk packagings above set thresholds, must register with PHMSA each year and pay a fee. Many Texas chemical and fuel shippers meet those triggers, so check the regulation or ask your compliance provider before your first placarded load.

Get a quote

Shipping chemicals, batteries or other dangerous goods from Texas to South Florida, or onward to Latin America and the Caribbean through PortMiami, Port Everglades or MIA? Go Freight can take the Florida leg, from receiving and bonded storage to final hazmat delivery. Request a quote or call (786) 445-0150.

Go Freight AI · Miami

Ready to move your next container?

Asset-based drayage at PortMiami and Port Everglades. We own the trucks, chassis, and the AI — same-day pickup, no brokers, no chassis rental surprises.

Topics: #Dangerous Goods #Hazmat Compliance #Texas #Top 10

Move freight with the only crew that owns the trucks, the warehouse, and the AI.

From the port to the door, in one phone call. We'll quote your next load in minutes — no logins, no broker games.

⏱ Rate locks for 48 hours — call today before capacity tightens.