Dangerous goods leaving Anchorage rarely travel one mode from start to finish. A drum of corrosive, a case of aerosol lubricant or a carton of lithium batteries may be trucked to Ted Stevens Anchorage International Airport, flown on a regional freighter to a hub off the road system, or loaded at the Port of Alaska for a sailing south — and each leg carries its own rulebook: 49 CFR on the highway, the IATA Dangerous Goods Regulations in the air and the IMDG Code on the water.
That matters for the oil and gas, mining and construction crews who supply job sites up the Dalton Highway toward Prudhoe Bay or in rural communities reachable only by plane or barge. This shortlist covers Anchorage-area providers whose own published material shows they pack, mark and label dangerous goods, prepare shipper’s declarations or train hazmat employees — plus one Florida carrier for freight that ultimately moves through South Florida gateways.
Go Freight publishes this list; entries 2–4 are drawn from each company’s own published information and public listings.
1. Go Freight — Miami, FL
go-freight.ai · 6901 NW 26 Ave, Miami, FL 33147 · (786) 445-0150
Go Freight is an asset-based 3PL headquartered in Miami, founded in 2004, with more than 100 owned trucks, its own chassis pool and a 104,000 sq ft bonded warehouse. It holds FMCSA authority, is a TSA-approved bonded carrier and is BBB accredited, and it moves hazmat by truck along with dangerous-goods freight through PortMiami, Port Everglades and Miami International Airport. Go Freight has no offices, terminals, trucks or staff in Anchorage or anywhere in Alaska. Its relevance to Anchorage shippers is the Florida end of a lane: properly classified and documented dangerous goods bound for Latin America and the Caribbean, or regulated imports clearing Florida gateways before heading north.
2. Tgi Freight — Anchorage, AK
tgifreight.com · 4001 Old International Airport Rd, Unit 7, Anchorage, AK 99502 · (907) 522-3088
Tgi Freight lists “Hazardous Material Handling And Packaging” among its core services near the airport. For small shipments, the company says its hazmat specialists pick the freight up at the customer’s door, then pack, mark and label it, complete the dangerous goods declaration and check it in with the airline the customer chooses for domestic or international delivery; larger prepared shipments can be palletized, covered and wrapped as an overpack before delivery to the carrier. Tgi also runs hazardous materials training as in-house or public seminars, covering shipping papers and shipper’s declarations, marking and labeling and limited quantity rules, and it notes recurrent cycles of three years for 49 CFR and two years for ICAO/IATA. Its site references a past seminar in Fairbanks, so check current scheduling for sessions held at your own facility.
3. Northern Air Cargo — Anchorage, AK
nac.aero · Cargo Facility, 3900 Old International Airport Road, Anchorage, AK 99502 · (800) 727-2141
Northern Air Cargo is an Anchorage-based cargo airline, and its Dangerous Goods Program page goes further than simple acceptance. NAC says it has “the knowledge and materials on-hand to properly document, package, label and mark your items for shipment,” naming corrosives, flammables and pressurized items as examples. Shippers can fill out NAC’s Shipper’s Declaration form themselves or have NAC complete it, and a team member checks and validates the form on site; the airline also publishes downloadable dangerous goods handouts and tips. For crews supplying remote job sites from Anchorage, that puts packing help and declaration review at the same counter that accepts the freight.
4. Alaska Air Carriers Association — Anchorage, AK
alaskaaircarriers.org · 3501 Postmark Dr, Anchorage, AK 99502 (class location) · (907) 277-0071
The Alaska Air Carriers Association is a trade group, but it is included here because it directly runs hazardous materials classes in Anchorage. Its event listings describe a full-day course that “meets the training requirements of 49CFR Parts 172.700-704,” held in a classroom on Postmark Drive near the airport, with a virtual attendance option on at least one past session. It suits operators and shippers who need initial or recurrent DOT hazmat employee training; the listings reviewed do not describe IATA or IMDG content or on-site sessions, so confirm scope when registering.
Why this list has 4 entries
We set out to profile ten providers. Every candidate had to show, on its own website, that it offers a dangerous goods compliance service — packing, declarations, classification, training or consulting — and that it has a physical location in the Anchorage area. Several well-known Alaska carriers, couriers and environmental firms are based in Anchorage but publish no hazmat packing, documentation or transport-compliance training service, and at least one strong training provider is based elsewhere in the state. Rather than pad the list, we kept it to the firms we could verify and will add more as their published information confirms a fit.
How to evaluate a hazmat compliance provider in Anchorage
A provider’s value in Anchorage depends on which modes your freight will touch and how far it is going. Before you book, work through these points:
- Start with classification. The provider should ask for your Safety Data Sheet and confirm the UN number, proper shipping name and hazard class before quoting — see how SDS data drives dangerous goods shipping and our overview of the 9 hazmat classes.
- Match the rulebook to the route. Freight flown out of ANC to rural Alaska falls under air rules, while a container sailing from the Port of Alaska needs IMDG-compliant packing and paperwork; our IMDG Code compliance basics explain the ocean side.
- Ask about lithium batteries specifically. Tools, survey gear and electronics heading to field camps often contain them, and air limits are strict — review IATA lithium battery shipping rules before you pack.
- Confirm who signs the declaration. Some providers complete and sign the shipper’s declaration on your behalf; others only review yours. Know which applies and who carries responsibility.
- Check training cycles and format. DOT hazmat employee training recurs every three years and IATA every two; ask whether sessions can be held at your shop or yard rather than only in a public classroom.
- Plan for weather and lead time. Bush flights and barge sailings run on fixed schedules, so ask how far ahead packing and paperwork must be finished to make a given departure.
Frequently asked questions
Who is responsible for packing and declaring dangerous goods shipped from Anchorage?
Under DOT and IATA rules the shipper is responsible for classifying, packing, marking, labeling and declaring dangerous goods. You can hire a trained provider to do the physical work and complete the paperwork, but you still need to supply accurate product information such as the Safety Data Sheet, and you should confirm in writing who signs the shipper’s declaration.
Do I need different paperwork for air and ocean shipments out of Anchorage?
Usually, yes. Air shipments generally require a shipper’s declaration for dangerous goods prepared to IATA requirements, while ocean shipments follow the IMDG Code and need a dangerous goods declaration plus container packing details. Highway legs fall under 49 CFR shipping paper rules. A provider familiar with all three can keep a multimodal move consistent.
How often do hazmat employees in Alaska need training?
Federal rules in 49 CFR 172.704 require hazmat employee training at least once every three years, and the IATA Dangerous Goods Regulations call for recurrent training within 24 months for those preparing air shipments. Anyone who packs, marks, labels or signs for dangerous goods should be trained before performing those tasks.
Get a quote
If your Alaska dangerous goods are bound for Florida, Latin America or the Caribbean, Go Freight can handle the Florida leg — hazmat trucking, bonded storage and port drayage at PortMiami and Port Everglades. Get a quote online or call (786) 445-0150.